Cold Applied Waterproofing
On this project they have been using a cold applied waterproofing system called Integritank for their below ground waterproofing.
This system is a structural waterproofing membrane for the protection of concrete structures and is applied using a multiple pass spray method to ensure an even coating which doesn’t slump after application.
The contractor maintains that the health and safety risk of cold applied in comparison to hot applied is a significant factor in the preference of a cold applied solution. Wherever possible, hot works should be avoided or reduced as a general principal and to avoid the risk of bitumen burns.
Applied Integritank weighs approximately 3kg/m2 versus a hotmelt system ranging between 9-14kg/m2 which will amount to a 20% volumetric saving. Integritank can be transported via a standard van whereas, depending on the hotmelt system a lorry may be required.
To find out more, click the link below.
Footer Reference
Monitor Report. Mace. London. June 2024.
Did you find this article helpful?
Please rate this article
(0 votes, average: 0.00 out of 5)You need to be a registered member to rate this.
Loading...About this entry
About the author
Jack Endean
Partnerships and Innovations Manager
Entries by this author 1006
View all entries by Jack Endean
Company Information
Considerate Constructors Scheme
http://www.ccsbestpractice.org.uk
The Scheme does not promote or endorse any products, goods or services. For more information, click here.
