Remote Controlled Cantilever Lifting Beam
In order to safely install elements of the unitised facade system beneath a concrete frame climbing screen system the project identified and implement the successful use of a WiFi remote controlled cantilever lifting beam.
This specialist lifting equipment reduced the risk of working at height and manual handling potential risks by being able to place loads closer to their final location beneath overhangs whilst the hook block of the tower crane was circa 2.5m offset.
The WiFi capability meant that the load slinger could be safely located on an adjacent floor level and remotely adjust the vertical height of the suspended load to a very exacting level. This very fine adjustment prevent the need for manual techniques ease the load position.
To find out more, click the link below.
Footer Reference
Monitor Report. Winvic Construction Ltd. Birmingham. May 2025.
Did you find this article helpful?
Please rate this article
(0 votes, average: 0.00 out of 5)You need to be a registered member to rate this.
Loading...About this entry
About the author
Jack Endean
Partnerships and Innovations Manager
Entries by this author 1005
View all entries by Jack Endean
Company Information
Considerate Constructors Scheme
http://www.ccsbestpractice.org.uk
The Scheme does not promote or endorse any products, goods or services. For more information, click here.
