Safety Helmet to Ensure Worker Safety

Millcroft Services plc changed to new safety hats that conform to EN12491 Standard and EN397 Industrial Standard for shock absorption and penetration. This is a multi-impact helmet to protect head during tumbling falls and from falling objects.

The helmet is impact tested with two 5kg strikers: a hemispherical striker is dropped from 2m onto the crown of the helmet and a flat striker from 500mm on to the front, rear and side by tilting the headform to 30°. In all cases, the transmitted force through the neck of the headform must not exceed 10kN.

Two penetration tests with a 3kg pointed striker are also performed within on any point around the shell of the helmet without making contact with the headform. Exceeds the shock absorption and impact tests of AS/NZS 1801 and EN397. Non-releasing chinstrap F >500N so the helmet is retained on the head during a tumbling fall or multi-impacts.

For more information about these helmets, click the link below.

Go to resource


Footer Reference

Entry submitted by Costain/Skanska JV


Did you find this article helpful?

Please rate this article

0 votes, average: 0.00 out of 50 votes, average: 0.00 out of 50 votes, average: 0.00 out of 50 votes, average: 0.00 out of 50 votes, average: 0.00 out of 5 (0 votes, average: 0.00 out of 5)
You need to be a registered member to rate this.
Loading...

Leave a comment

Return to previous page

The Scheme does not promote or endorse any products, goods or services. For more information, click here.