Vapour Control Layer Pre-Install Application
Working at height is always high risk. As the winter months approached at the Midlands Centre for Cyber Security, a unique system was developed to omit the risk completely.
Once the CLT roof panels had been delivered on site, the Vapour Control Layer was applied at ground level then craned into position. This therefore meant that the operatives were not required to work around the crane on the roof, as well as preventing the timber panels becoming wet and disrupting the project schedule.
Using this installation method, the panels remained at the correct moisture content to continue in a timely manner.
Footer Reference
Entry submitted by Speller Metcalfe
Did you find this article helpful?
Please rate this article
(0 votes, average: 0.00 out of 5)You need to be a registered member to rate this.
Loading...About this entry
About the author
Sophie Hambling
Assistant Design Coordinator
Entries by this author 9
View all entries by Sophie Hambling
Company Information
Speller Metcalfe
https://spellermetcalfe.com/
The Scheme does not promote or endorse any products, goods or services. For more information, click here.
