Tags

A list of entries tagged with September 2020 innovation

Return to previous page

Fob System for Restricted Access Areas

Published 10 November 2020 | Written by Tatiana Meakin
CategoriesAccess/egress Drills Emergency procedures Protected and controlled access

As the project progresses there have been increasing numbers of restricted (small areas where 2no. people only can work in tight conditions, or where access/escape is difficult to achieve) and confined spaces. Normally, they would manage these with permits to access and work, though this is a paper system/manual system and does not allow for sufficient tracking of operatives. It…


Young Person Safety Leadership Team

Published 2 November 2020 | Written by James Roy
CategoriesAttitudes Management Supply chain engagement

The senior leadership on the project had a Safety Senior Leadership Team (SLT) that looked at health and safety issues on site, but an opening was found on how the site could engage young people in health and safety on a practical level. This led to the creation of the Young Person SLT (YP SLT). The YP SLT helps give…


Work Pack Strategy

Published 2 November 2020 | Written by CCS Best Practice Hub Administrator
CategoriesEmployed Personal development Training

The ‘Work Pack’ strategy employed on the project actively encourages workforce and separate trade engagement in developing RAMS, logistics plans, design and trade interface etc. Work Packs are holistic, containing all of the information that construction operatives and teams require. Project information is filtered, structured, formatted and presented to suit construction activities and each element on the project is brought…


Using a 3D Printer to Produce Adjustable Straps for Face Masks

Published 2 November 2020 | Written by CCS Best Practice Hub Administrator
CategoriesMedical conditions Occupational health risks PPE

A 3D printer was used to produce 600 adjustable straps to permit the wearing of normal ear strap face masks to be worn by NHS staff, without the need to wear behind ears so removing the potential irritation and soreness. Positive in two ways firstly it allows existing PPE to be worn rather than be disposed of, and secondly it…


Tracking System on Hardhat Identification Tags

Published 2 November 2020 | Written by CCS Best Practice Hub Administrator
CategoriesHealthy lifestyle advice Occupational health risks

The site has been involved directly with an IT developer and have now installed a tracking system where each operative has an identification tag on their hardhats which records their position on site at all times. Using the information identification can quickly be established if operatives are failing to comply with social distancing. The system also provides information should anyone…


Removing a Pipe Bridge using Air Bags

Published 2 November 2020 | Written by CCS Best Practice Hub Administrator
CategoriesWorking methods

As part of the scope of works on the Ferrybridge site there are 3 pipe bridges to remove, one of the bridges, know as Stocking lane bridge, has very restricted access. Traditional lifting methods using mobile cranes proved unachievable due to the restricted access, the team explored a variety of options including the option to jack up and float the…


Prefabricated Multiservice Panels

Published 2 November 2020 | Written by CCS Best Practice Hub Administrator
CategoriesAccess/egress Initiatives Inspections Protected and controlled access

Specifically designed and developed multi building engineering services panels have been fitted into fire walls to ensure fire compartment integrity and enable flexibility for future retail fit out. The potential for coring and cutting blockwork and concrete walls has also been eradicated ensuring less dust and safer construction. Connections are built into panels for all potential building services ventilation such…


Odour Suppression with a Dry Vapour Unit

Published 2 November 2020 | Written by CCS Best Practice Hub Administrator
CategoriesAir quality

Although constant automated monitoring of external conditions is carried out, there has been a development in this field with regard to odour suppression. Previously water was pumped at pressure to form an atomised mist to capture odours relative to gas facilities. A new system has been developed and used on site which eliminates the need for water. The kit uses…


Method for Uprighting Large Components

Published 2 November 2020 | Written by CCS Best Practice Hub Administrator
CategoriesInitiatives Working methods

The site has devised a simple, cheap and effective method for uprighting large components while keeping operatives at a safe distance during the lift. It employs a spacer bar, sleeved bobbins, bow shackles and an up-righting tool. This replaces chain pulls and is a fraction of the cost of equivalent snatch blocks. It further ensures that the load is equally…


Logistic Hubs and Waiting Area Provision

Published 2 November 2020 | Written by Laura Sutherland
CategoriesBusinesses Community liaison Residents Traffic management arrangements

To support local businesses and residents who may affected by the works, SFN implemented logistic hub provisions and waiting areas throughout the route to support those who are affected by the works. This has been well received by the local community and the project continued to receive compliments about such provisions and the way in which the local community is…


Fire Extinguishers for All Fire Types

Published 2 November 2020 | Written by CCS Best Practice Hub Administrator
CategoriesEmergency procedures Initiatives

Two fire extinguishers are used on site, a floor standing unit and a personal belt located unit. Both have fire-fighting technology to enable them to be used to extinguish all classes of fire except high voltage electrical fires. The units are extinguish-safe & spray-safe respectively. Their use precludes the need to choose a specific extinguisher to suit a particular class…


Cone Carrying System

Published 2 November 2020 | Written by CCS Best Practice Hub Administrator
CategoriesInitiatives

The project uses a demarcation system along the temporary roads and the trackpad access routes. This involves the use of a large number of cones to signify the edge of the demarcation for both the contractor and the landowner. The company have developed a cone carrying system which clips on to the field tractor. 30 – 40 cones can then…


Asphalt Surfacing Technique to Improve Longevity

Published 2 November 2020 | Written by CCS Best Practice Hub Administrator
CategoriesEfficient energy use Efficient fuel use Energy saving measures Improvement Plant and machinery Programming Reduce

The contractor used a surfacing technique that has not been used in the UK previously on a bridge resurfacing project. The wearing course Asphalt matt was laid by ‘Paving in echelon’ which means using two Asphalt pavers working in tandem which meant they were able to lay the entire new bridge wearing course with no joints. By laying the asphalt…


Project Specific Road Safety Booklet

Published 26 October 2020 | Written by Lucy Shirley
CategoriesAccess/egress Campaigns CLOCS Driver information FORS Roads Traffic management Workforce information

As a Principal Contractor CLOCS Champion, Galliford Try is committed to managing work-related road risk and promoting a positive road safety culture. We align with the CLOCS mission: to ensure the safest construction vehicle journey. At our Ashley Road East project in Tottenham Hale, our Galliford Try Construction – London & South East Commercial team devised a 12-page A5 booklet…


Water Treatment – Pipe Reactor

Published 19 October 2020 | Written by Conan Quinn
CategoriesInvestigation Involvement Preventing silt pollution Programming Rivers/watercourses Specialist input Storage of hazardous materials Wildlife

The CAR licensing requirements issued by the Scottish Environment Protection Agency (SEPA) required effluent from the Haudagain site not to contain any instantaneous sample more than 100 mg/L of suspended solids. Given this and the space constraints noted on site for typical SuDS measures such as settlement ponds, the project team endeavoured to develop a sustainable solution. Through our supply…