taxonomy.php
On this project, they have implemented a significant initiative by installing two cruciform cranes within just two days. These cranes are designed to sit on engineered concrete bases, meaning no piling works are required. This approach eliminates the need for piling, significantly reducing noise, vibration, and disruption to the surrounding community. The cranes can be installed in a far quicker…
The project team, using as built information and record photos of the installation, were able to identify the original method for installation, which while this could not be recreated allowed them to develop a concept to remove the glazing from within the building, using a variety of hoisting methods. They finalised a bespoke recovery method, which successfully allowed them to…
Streetwise’s video-based traffic survey technology is revolutionising traffic management on this project, by replacing manual counts with camera-based junction and link monitoring, that deliver precise, verifiable data that drives smarter decisions. Dynamic diagrams and visual outputs make complex traffic patterns instantly clear, while quality controlled footage ensures transparency and compliance. On this project they have clocked 1 million cyclists in…
The project is in a high-crime area, posing challenges for the local community. As a major construction site, it attracted criminal attention and became a target for theft, impacting subcontractors, especially SME’s. In response, the team partnered with Sunbelt Rentals and the Met Police to trial a solution. A total station was fitted with two GPS trackers, one visible and…
This contractor has deployed AI-powered edge computing cameras across the entire 80km worksite to monitor access points where public rights of way intersect with construction zones. Traditionally, these locations required 24/7 manned security, with two personnel per site due to lone working restrictions. The new system uses AI models to process live video feeds and detect anomalies such as unauthorised…
This contractors introduced a purpose-built jet wash attachment designed specifically to clean the underside of vehicles. It enables thorough cleaning before services and MOT’s, as well as for general maintenance. The attachment is easy to install and operate, making it suitable for use across fleet depots, service centers, and construction sites. Traditional vehicle cleaning methods often neglect the undercarriage, leading…
This contractor replaced traditional caution tape methods with EMS (Electronic Marker System) marker balls to enhance the identification and traceability of underground services. Each marker ball is filled with a liquid that emits a signal containing key information, such as depth, service type, and surrounding conditions, which can be detected by a CAT (Cable Avoidance Tool) user. This system is…
A new method of piling was used on this project to enable the piling with extraction to be carried out in very close vicinity to homes and businesses. This method stops any over drilling needed, any escaping air which could cause localised damage, dust and flying debris. Previous methods used were causing too much noise and vibrations causing damage to…
This contractor has used the latest incursion technology, the Intellicone, to ensure workforce safety, while ensuring minimal disruption to a local ambulance station. The Ambulance service were appreciative of this initiative and commented: “Overnight access went smoothly yet again and appreciated the swift removal of the traffic management ahead of advertised time. Very minimal delay to the Ambulance Service.” The…
Road-going mobile cranes are a common sight on roads and construction sites across the UK and like all heavy equipment, have the potential to cause great harm if not maintained and operated in a safe and efficient manner. When using mobile cranes, several important factors must be considered to help reduce risk. These include decisions made at the procurement stage,…
The team have devised an automated safety initiative whereby pedestrians are safeguarded from oncoming vehicles using the sites one-way system. Upon entering the one-way system, a motion detection device identifies a vehicle and automatically locks the pedestrian access/egress gates. Upon doing so, the vehicle barrier is lifted and the system uses a secondary device to record that the vehicle has…
This contractor has introduced the use of reverse graffiti to display the company logo on pavements and surrounding hoardings to assist with site wayfinding. Using high-pressure water and a custom stencil, the technique cleans targeted areas to reveal the logo without applying any materials. This not only enhances brand visibility but also provides a sustainable and creative method for guiding…
This contractor is using the Vaisala system to drive through sites as part of the “Walk Talk” build process. The system looks for inconsistencies in the road, such as dips, and potholes as well as recording assets along the road. The information can be used to decide where patching might be required before the surface treatment takes place, after the…
A Delivery Management System (DMS) plans, manages, and monitors vehicle movements to and from site, ensuring materials, equipment and resources arrive safely and efficiently. By controlling resource flow into site, a DMS optimises the safety of both the site workforce and vulnerable road users around the site. An effective DMS can help businesses improve the efficiency and outcomes of their…
CLOCS has developed a toolkit of materials and guides to help members educate children about the risks associated with Heavy Goods Vehicles and how to stay safe around them. These materials have been developed for a school or youth group visit with a HGV hands-on ‘show and tell’ experience. Alternatively, the sessions can be delivered without a vehicle, and this…