Forced Air Debonding

Any efforts to reduce dust generation is a positive for the environment, workforce and community.

There should always be room to implement innovative techniques, which may have a positive impact on safety or the environment.

One site achieved this through the implementation of forced air de-bonding:

Forced air de-bonding strip was used in piles to limit reduction works and avoid need for cutting;
Hollow plastic device was introduced, with air forced in to burst joint at cut-off level, thereby limiting dust generation;
Very shallow wedges were placed on top of the cropping level (on top of a de-bonding strip), and grout then continued to the top of the pile;
When they come to cropping, they force air into the wedges, and this expands the material enough to lift the waste from above the cropping level off the de-bonding strip for removal by machine;
There is no cutting and if widely used this innovative approach would reduce dust generated in this type of operation significantly.

Footer Reference

Monitor report. A J Morrisroe & Sons Ltd. London. April 2016

Did you find this article helpful?

Please rate this article

(0 votes, average: 0.00 out of 5)
You need to be a registered member to rate this.

Published 19 May 2024
Views 4457

Categories
Dust,

Size of site
Large, Very Large,

Level of Best Practice
Good practice,

CCS Best Practice Hub Administrator
Research Assistant

Entries by this author 34

Company Information

The Scheme does not promote or endorse any products, goods or services. For more information, click here.