taxonomy.php
The team have implemented a way of plunging the reinforcement for the bearing piles which significantly reduces the workload for the following trades and reduced waste steel being produced, along with making the works on site safer and quicker. Traditionally pile reinforcement would be installed into the pile with the top of the reinforcement finishing level with the piling platform….
This contractor is using Schindler R.I.S.E, which is a self-climbing robot designed to navigate elevator shafts independently while installing components with precision and speed. Equipped with tools to drill holes and install anchor bolts, Schindler R.I.S.E significantly reduces human involvement in this part of the construction process, removing workers from the noisy, repetitive, and dusty tasks of drilling and setting…
This contractor implemented a breakaway hi-vis vest which has been introduced as mandatory for all machine operators. This item pulls apart if caught on a moving part such as the controls, a door or similar. This vest will help to prevent injuries and accidents caused by ‘caught’ clothing on machinery or moving parts and will help reduce injuries and accidents…
The CAGE Hybrid Gas Engine (HGE) is a novel generator technology developed and trialled on this construction site. It enables seamless switching between hydrogen, LPG, and (potentially) biomethane fuels, providing a flexible, low-emission alternative to traditional diesel generators. The system is designed for easy integration with site battery storage units and can be optimised for different gas fuels at the…
This contractor replaced traditional caution tape methods with EMS (Electronic Marker System) marker balls to enhance the identification and traceability of underground services. Each marker ball is filled with a liquid that emits a signal containing key information, such as depth, service type, and surrounding conditions, which can be detected by a CAT (Cable Avoidance Tool) user. This system is…
This contractor is using the Hilti HCS T1 Bluetooth-enabled sensor that monitors in-situ concrete temperature and maturity to determine real-time strength. Unlike similar solutions, this is compact, easy to install, and requires no hubs or complex setup. It provides instant digital data through the Hilti app, enabling faster, safer decision-making on-site while ensuring full traceability and ASTM-compliant accuracy. This makes…
A new method of piling was used on this project to enable the piling with extraction to be carried out in very close vicinity to homes and businesses. This method stops any over drilling needed, any escaping air which could cause localised damage, dust and flying debris. Previous methods used were causing too much noise and vibrations causing damage to…
A rapidly deployable, transportable wind turbine was developed by Murcott Energy, in conjunction with Network Rail and South Rail Systems Alliance (SRSA). This device aims to offer renewable energy to remote railway worksites that otherwise would have typically relied on diesel generators for power. The Murb Wind Turbine is currently being trialled at their site at Old Oak Common. The…
This contractor has used the latest incursion technology, the Intellicone, to ensure workforce safety, while ensuring minimal disruption to a local ambulance station. The Ambulance service were appreciative of this initiative and commented: “Overnight access went smoothly yet again and appreciated the swift removal of the traffic management ahead of advertised time. Very minimal delay to the Ambulance Service.” The…
This contractor is implementing long-term structural and geotechnical monitoring to enhance the value of the constructed piles. Fibre optics have been installed in piles and columns over a land and marine environment and soil sensors grouted in beneath the concrete basement slab and pile caps to measure ground bearing pressures. This use of the technology has not been used before…
On this project they have been using Disperse, which is an AI progress tracking system and 360 degree image recognition system capturing site images from a fixed location on a weekly basis. It enables automated progress tracking, detailed reporting, and long-term data retention to support post construction management. Disperse has transformed team collaboration on the project by breaking down information…
The Whale on the Wharf is a four-storey breaching whale sculpture installed at this project. This transformed ocean plastic into art to raise awareness about marine pollution. Beyond its symbolic meaning, it integrates cutting-edge sustainable engineering notably the use of biochar concrete, an emerging low-carbon construction material. Biochar stores up to 85% biogenic carbon, acting as a carbon sink that…
The team have devised an automated safety initiative whereby pedestrians are safeguarded from oncoming vehicles using the sites one-way system. Upon entering the one-way system, a motion detection device identifies a vehicle and automatically locks the pedestrian access/egress gates. Upon doing so, the vehicle barrier is lifted and the system uses a secondary device to record that the vehicle has…
This project is the first to use Gyproc SoundBloc Infinae© 100 12.5mm with Gypframe® Carbon Low metal profiles. The Gyproc board sets a new benchmark for sustainable construction, providing the industry with the first UK manufactured plasterboard as it is made 100% from it’s own recycled waste. Globally, gypsum board waste is a significant issue, with estimates suggesting over a…
This contractor is using mushroom packaging which is a sustainable substitute to polystyrene. This eco-friendly alternative provides the same protection while being fully biodegradable, cutting plastic waste and reducing carbon footprint. The product has the following features, it is: biodigestable, biodegradable, hydrophobic, cruelty-free, vegan and it is grown. The technical benefits of the product are it is: vibration tested, edge…